Residential Serving New Jersey, Delaware & Eastern Maryland

Time Savings

A Superior Walls project can typically be installed in just hours, not weeks. Wall panels are set in place by crane and secured together with bolts by trained crews; laser-leveled to be plumb, level, and square. Joints are sealed tightly and permanently with special adhesive sealant.

Scheduled Delivery

Once completed and cured, Superior Walls products are delivered to the job site. This factory-to-job site delivery promotes reliable scheduling, allowing projects to run more quickly and efficiently, with less waste and less down-time.

Professional Installation

The building industry’s leaders are building today’s new homes with Superior Walls products. Certified trained crews install our superior systems typically in less than one day, in virtually any weather. Your builder can save valuable time building your home with the dry, warm, smart, superior solution.

Build Your Dream Home On A Superior Foundation Xi & Xi-15 From Superior Walls

Xi

Nearly Everything Is Insulated In The Xi Wall Precast Concrete Foundation System, Including Corners, Studs And Bond Beams.


  • Zone 4 Compliant
  • The unique design makes the Xi Wall thermally isolated and insulated from the exterior elements. The foundation wall is monolithically poured (poured all at once) with high-strength concrete for solid structural integrity and reinforced with steel rebar and polypropylene fibers.
  • The Xi Wall’s special high strength, low-water concrete mix also requires no additional damp-proofing, benefiting from technology developed for the original Superior Walls precast concrete system. And the Xi Wall meets or exceeds energy conservation requirements from both the 2015 IECC and the 2015 IRC in most climate zones.
  • The high-tech engineering and numerous advanced features of the Xi Wall make it the precast concrete foundation system of the future and the only choice for selective architects, builders and home buyers.

Check out Superior Walls on This Old House. Featured in projects "Net Zero Home" and "This Old House 2018 Idea House".

Xi-15

Based upon the proven design of the Xi Wall System, the Xi-15 Superior Walls system brings many exciting additional features for selective builders and homeowners.


  • Zone 5 Compliant
  • Insulated access holes are included in each standard stud to provide greater ease in wiring and plumbing.
  • The Xi-15 wall system also comes with a four inch insulated bottom footer beam. A standard 4″ thick floor slab may be poured equal to the height of the footer beam, eliminating the need for an additional screed board, saving time and money in the construction process.

Effective March 20162015 IRC/IECC Basement Compliance Notice

An insulated basement becomes part of the building thermal envelope. This alone enables you to NOT insulate under the first floor and not insulate the hvac ducts in the basement.

ZONE

4


Basement Insulation: R-10/13

R-10 is with continuous insulation and R-13 is for a stud wall cavity

Floor Insulation: R-19

This is for floors over a basement with NO insulation

Duct Insulation: R-6

This for duct work in an UNINSULATED Basement

Zone 4: Use the Xi wall system for a continuous insulation value of R-12.5


ZONE

5


Basement Insulation: R-15/19

R-15 is with continuous insulation and R-19 is for a stud wall cavity

Floor Insulation: R-30

This is for floors over a basement with NO insulation

Duct Insulation: R-6

This for duct work in an UNINSULATED Basement

Zone 5: Use the Xi-15 wall system for a continuous insulation value of R-15.3


Extra Strength. Extra Insulation.


  • Provided with integral insulation R12.5 or R15.8
  • 5000+ PSI concrete reinforced with rebar and polypropylene fibers
  • Insulated access holes for wiring and plumbing
  • Meets Energy Conservation Code requirements for basement (IECC Chapter 4, IRC Chapter 11)
  • Thermally isolated/insulated from exterior
  • Insulated corners, studs and bond beam
  • Monolithically poured = greater strength
  • Galvanized steel stud facing
  • Stud cavity allows for additional insulation
  • No additional dampproofing required
  • Precast openings for windows and doors
  • Reduces building time
  • Ready in virtually any weather

Superior in every way.

Features

  • Installed in Hours & All Year-round
  • Green & Efficient Design for Lower Energy Costs
  • Ready to Finsih - Pre-Studded, Pre-Insulated, with Prefabricated Steel Stud Face and Wire Chase Holes for Electrical and Plumbing
  • 5000+ PSI for Durability & Strength
  • Custom Design Flexibility
  • Quality Controlled Manufacturing
  • Code accepted - factory insulated to meet 2015 Building Code

About Superior Walls Products

Superior Walls foundations feature patented, insulated, precast concrete wall panels that are formed in a factory-controlled setting and delivered to the job site, where the panels are lifted into position with a crane and carefully bolted together and sealed. The walls are custom-designed and built to virtually any architectural style, complete with window and door openings.

Superior Walls panels are available in a variety of standard heights and custom lengths to suit your project. The maximum axial load (uniform house weight) for this product is 7,500 pounds per linear foot. Special point loads up to 50,000 pounds can be accommodated.

QUALITY ASSURANCE Each manufacturing plant is regularly inspected by an independent third-party inspection agency to ensure compliance with the Quality Assurance program. In addition, manufacturing and installation personnel are certified by Superior Walls of America, Ltd.

DAMPPROOFING The concrete used in the Superior Walls wall systems provides protection against freeze/thaw cycles and water vapor transmission. The urethane sealant used between panels provides superior protection against water penetration. Therefore, no additional dampproofing materials are required.

VAPOR BARRIER No vapor barrier required. Permeance of the Superior Wall panels have been tested in accordance with ASTM E 96.

FIRE RESISTANCE Superior Walls products do not require the attachment of a 15-minute thermal barrier. Ref ICC-ES ESR-1662.

Superior Walls products qualify as a two-hour fire separation wall when two layers or 5/8” Type ‘X’ drywall are applied to the studs.


It is my professional opinion that Superior Walls system is a time tested product that has been installed in a variety of environments and has been evaluated and approved with both the Canadian Construction materials Center (CCMC) and the International Code Council Evaluation Service (ICC-ES). Based on these evaluations and my professional experience with this product I can attest to the performance of the Superior Walls Foundation System.

— Jack S. Smith, RA, Bishop & Smith Architects

Green Building Superior Walls Comparison

Green Quality

Superior Walls

Poured Walls

Block Walls

NGBS Certified as a Green Product
A component of LEED-H certification without additional expense
A component of Energy Star certification without additional expense
Complies, without additional expense, with IECC 2015 Energy Code: R10 continuous insulation in basement walls
Recycled material in concrete (SW 15% Fly Ash)
Lowest % of concrete used to obtain highest strength. Superior Walls is above 5,000 PSI using 70% less concrete than 10" thick poured wall.
Warranty against side wall water penetration
Cast in metal stud facers eliminates the need to frame out the exterior walls with wood
Air quality is improved by preventing moist air penetration
Reduces the possibility of mildew and mold
Minimal job site clean up
No additional building cost for finishing the external basement walls. Superior Walls is pre-studded, pre-insulated, with steel stud face and wiring chase holes prefabricated. Ready to finish!
Air infiltration - minimal envelope leakage when used in above grade applications
Enhanced insulation is a part of the wall without added expense / Exceeds IECC 2009 requirements for continuous insulation R-Value by more than 25% / Meets HERS grade 1 for insulation
Off-site fabrication, prefabricated construction
Recycling of residue materials from manufacturing procedure / concrete, steel, insulation
Requires no emulsified oil coatings to be applied to the exterior of the wall and gaskets between the footings and the bottom of the foundation

Have a question?

(866) 699-2557

Call us today!

We want to hear from you Contact Us

How can we help you?

Your Contact Information

CONNECT WITH US
Northeast Precast

4081 S Lincoln Ave
Vineland, NJ 08361
(866) 699-2557